Application on the type of stone: Does not require a polish when used on a polished surface marble and granite.

Poultice Procedures:

• Step1: Remove topical coating, (if any).
  If a thin film of coating is noted, removed with SCL-XY stripper before poultice. Otherwise, you are poulticing on the wax coating.
• Step 2: Prepare the poultice.
  Mix SCL-DPP Powder with SCL-RA1 into a paste about the consistency of a creamy peanut butter.
• Step 3: Apply the poultice.
  Carefully apply the poultice to the stained area. Not too thin, generally about 1/4 inch thick is sufficient for most stains.
• Step 4: Cover the poultice.
  Cover the poultice with a clear thin transparent plastic sheet or a plastic food wrap. Tape the poultice with a low adhesive paper masking tape.
• Step 5: Remove the poultice.
  Remove the poultice after 48 hours. Dispose them in a plastic bag. If the stain is lightened, you possibly need a second attempt. Clean the residues of the poultice with SCL-STONECLEAN or SCL-STONEMIST.

Important Notes:

• RA1 is not allowed to mix with SCL-PPP Poultice Powder.
• Put on gloves while handling this product.
• Put on half-faced respiratory mask when you are applying RA1 in an enclosed area.

Precautions:

• If contacted with skin, immediately wash the affected area with plenty of water. The whitish skin will disappear after an hour. Apply moisturizer soothe the skin.
• If contacted with eyes, immediately wash with water for 15 minutes. Call a physician. Keep out of reach of children.
• Wash hands thoroughly before meal-time.
• Keep out of Reach of Children.