0
  • No products in the cart.
Total:$0.00

Shop

, ,

SCL-(106) MARBLE POLISHING POWDER + RED PAD

$48.00

SCL-(106) Marble Polishing Powder is a non-acidic powder.  It is specially formulated to polish on White colour marble, Black marble, Green marble and Black Sandal wood marble. To achieve “mirror” shine finished without getting “orange-peel” look, it is best used 106powder after diamond grinding.  Using 105 marble polishing powder on dull marble will work better than 106 powder if you are not prepare to do diamond grinding.

 

Product total
Options total
Grand total

Properties: Non-acidic, White in colour, Odorless.

Powder net Wt.: 500 gram

Red pad size: 4inch diameter

“Do-It-Yourself” polishing procedures:

  • A variable speed polishing tool is required, as a Single speed polishing tool is not suitable to carry out marble polishing powder. A Single speed is too fast and will spin the polishing powder off the marble surface.
  • Adjust the tool to its slowest speed(speed number 1).
  • Attach the red pad to the pad holder.
  • Put 2 teaspoonfuls of 106 marble polishing powder onto the etched area.
  • Spread out the powder within circumference of the red pad. Do not put powder at area where you are not ready to polish. Polish a small area at any one time, approx. 1.0 sq.ft. (300mm x 300mm). Put a few pieces of cloth surround the polishing area to prevent the marble powder’s slurry from splashing out far. Do not polish too near to the cloth as you may coil the cloth. Move the tool one palm size distance away from the cloth. Do not panic if you coil the cloth. Just stop the tool, uncoil the cloth and continue polishing again.
  • Place the tool & red pad on top of the powder.
  • Spray enough water to 106powder making it a thick slurry when polishing.
  • Exert some strength to the polishing.
  • Polish between 2 to 5 minutes. You are allowed to polish 106 slurry to almost dry.
  • Upon shine is achieved, spray down the ready-to-use Stonemist(pH7.0) to clean the marble surface.
  • Put a small pail of water beside you. Rinse the cloth in the pail of water. Wriggle the cloth dry and wipe the marble surface again.
  • Dry the marble surface with a dry cloth. Check the result.
  • If the result is not satisfactory, repeat the above polishing steps. 2nd attempt of polishing required to put new powder.

To remove “soap scum” on Sandalwood black marble wall at shower area: Exert maximum strength when polishing 106powder. Diamond grinding is not necessary. After polishing 106powder is completed, apply SCL 748Clear Enhancer Sealer to bring a more brilliant colour to the natural beauty of the stone.

First Aids:

  • If contacted with eyes, wash the affected area with plenty of water and call for a physician.
  • Wash hands thoroughly before mealtime.
  • Keep out of reach of Children

 

 

 

Categories: , ,

Related Products