Shop

SCL Stain-X Penetrating Sealer (1L)

$35.00

Stain-X Penetrating Sealer is designed to prevent water & oil fluids from entering the porous marble and granite countertops. It allows you to wipe off the stain on the marble or granite surface within 12 hours.

Benefit: The sealer does not block the capillaries of the stone to “breathe” i.e. it allows vapor transmission.

Notes:

  • SCL Stain-X Penetrating Sealer does not make the stone surface acid resistant or water proof.
  • Remove penetrated stain using the poultice method before apply SCL Stain-X Penetrating Sealer.

Caution: Use in a well ventilated area.

Usage: Re-apply SCL Stain-X Penetrating Sealer half yearly or when needed.

Direction to use:

  1. Surface must be dry before sealer’s application.
  2. Prepare a tray and a roller brush. Put sealer into the tray. Begin to roll the sealer in a small area. A second application is recommended to apply 30 minutes in between coat.
  3. Do not allow the sealer to dry on the surface for the last coat.
  4. While the sealer is semi-dry, immediately use a dry paper towel or dry cloth to rub the sealer in a circular motion until original luster is obtained.
  5. Number of coats shall depend on the porosity of the stone. Generally, polished surface only required one coat.
  6. Refrain the surface 48 hours to contact with water (i.e. washing or cleaning with a wet cloth).
    Home-Fix DIY stores are available.

Purchasers are required to test the suitability of the product for their intended use. mcare Lab Pte Ltd makes no warranty, expressed or implied on the products and the effects. mcare Lab Pte Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.

Download usage guide for cleaning kitchen countertops

SKU: SCL Stain-X Penetrating Sealer (1L) Categories: ,