Application on the type of stone: Does not require a polish if use on polished surface granite. Required a severe polishing when apply on Metamorphic marble.
Remove topical coating, (if any).
If a thin film of coating is noted, removed with SCL-XY stripper before poultice. Otherwise, you are poulticing on the wax coating.
Prepare the poultice.
250m1 of SCL-RA2 Part A + 250m1 of SCL-RA2 Part B + 240grams of SCL-DPP Poultice Powder.
Apply the poultice.
Carefully apply the poultice to the stained area. Not too thin, generally about 1/4 inch thick is sufficient for most stains.
Cover the poultice.
Cover the poultice with a clear thin transparent plastic sheet or a plastic food wrap. Tape the poultice with a low adhesive paper masking tape.
Remove the poultice.
Remove the poultice after 48 hours. Dispose them in a plastic bag. If the stain is lightened, you possibly need a second attempt. Clean the residues of the poultice with SCL-STONECLEAN or SCL-STONEMIST.
RA2 Part A is not allowed to mix with SCL-PPP Poultice Powder.
Never use RA2 Part B chemical on Limestone & polished marble.
Put on gloves while handling this product.
Put on half-faced respiratory mask when you are applying SCL RA2 chemical in an enclosed area.
Disposed this chemical properly according to manufacturer advice.
Purchasers are required to test the suitability of the product for their intended use. mcare Lab Pte Ltd makes no warranty, expressed or implied on the products and the effects. mcare Lab Pte Ltd shall not responsible for any risks or liabilities, direct, indirect or consequential arising out of the used or the inability to use the product.