SCL Handy Shine is designed to remove mild etched-mark on marble & solid surfacing vanity tops. It is an ideal product for a layman. Severe dullness, scratches, open vein conditions and occurs in big area such as a living hall required the Professional.
PREPARE THE SURFACE — Clean the surface with SCL Stonemist(pH7.0) prior to use SCL Handy Shine. Be sure of the surface is dry before using Handy Shine.
Stir Handy Shine well before use. Apply a small amount of Handy Shine onto the Red pad with the spatula given. Press the pad down onto the marble surface (i.e. onto the etched mark area).
Begin to rub Handy Shine in circular motion for 1 to 2 minutes. Exert force and rubbing in a fast motion help to bring a better shine. Severe condition needs to polish longer. Always polish Handy Shine in a small area. Do not leave Handy Shine stays on the marble surface longer than 10 minutes unattended. Apply Handy Shine on marble surface only when you are ready for the polishing.
After 1 to 2 minutes of rubbing, wipe off Handy Shine thoroughly with 3M Microfiber cloth. The cloth needs to be in a dry condition. Check the shine. Re-peat step 2 & 3 (i.e. rub, wipe & check the shine) until etched mark is completely removed and luster is ob-tained. Note: If the rubbing get difficult at step2, sprinkle few drops of water to the marble surface and continue the rubbing. Also do not put too much water, you might dilute Handy Shine and luster will not be obtained.
After luster is obtained, marble surface is clean & dry, apply SCL 748Clear Enhancer Sealer onto the marble vanity tops. Dab the dry paper towel with SCL 748Clear Enhancer Sealer and rub the enhancer sealer in a circular motion until the marble surface is enhanced. Now, take another piece of clean dry paper towel rub the surface again until the surface is not greasy. Avoid contacting with water for 24 hours after sealer’s application.
Caution: Do not apply SCL 748Clear Enhancer Sealer on marble floor. It caused slipperiness.
Important note: SCL Handy Shine is a greasy product, it caused slipperiness. When Handy Shine is needed on marble floor in the shower area, it is highly recom-mended to rinse the marble floor with SCL Stoneclean-Xtra solution and water after luster is obtained.
SCL STONEMIST (pH7.0) is a ready-to-use stone cleaner. Just spray and wipe with a clean dry cloth. An ideal product to use it daily as a stone maintenance product for the vanity tops.
SCL STONE PROTECTOR protects against mild etched mark and mild soap scum when used on marble & solid surface vanity-tops.
Direction to use:
Shake bottle well before use.
Wet the dry paper towel with SCL Stone Protector. Rub the protector onto the marble vanity top which you could see the surface is wet with the protector. Just rub in circular motion until the surface is not greasy anymore.
Weekly application helps prevent water droplets and glass ring from forming on the marble surface.
Wet the paper towel with the clear enhancer sealer. Rub the enhancer sealer in a circular motion until the marble surface is enhanced. Allow 5 minutes interval before applying the 2nd coat when needed.
Now, take another piece of clean dry paper towel rub until the surface is not greasy anymore. The more application you apply, the darker color tone you will obtain. However, the number of coats shall depend on the porosity of the stone surface.
Refrain the marble surface to contact with water (e.g. washing or cleaning) for the next 48 hours after sealer’s application. Apply SCL 748Clear Enhancer Sealer once every quarterly or half yearly is recommended. To give maximum protection, apply once every month is prefer.